Sloan Waterfree Urinal Replacement Instructions

If you are a maintenance person who services Sloan Waterfree Urinals, then this article is for you! Sloan waterfree urinals are fantastic fixtures to install if you want to save water, lower sewage bills, and attain LEED certifications. This blog will show you the most up to date Sloan waterfree urinal cartridge information with step-by-step instructions. You will learn the most common mistakes when it comes to servicing Sloan waterfree urinals. You can read our frequently asked questions about waterfree urinals and waterfree urinal cartridge replacement. We also include links to all the waterfree urinal fixtures, cartridges, and cartridge replacement tools we have in our online store. Read on to get all of this information in our waterfree urinal cartridge replacement guide.

Sloan Waterfree Urinal Replacement Instructions

*The step by step instructions below are from Sloan Valve’s Installation & Operating Instruction Manual. We have adapted their instructions to include our tips and additional information.

Sloan waterfree urinal cartridge replacement instructions

1. Insert the key into the cartridge.

 

2. Turn key to the left (counterclockwise) to unlock the waterfree urinal cartridge.

 

3. Lift and tilt the cartridge to drain it of all liquids (water, sealant, urine).

 

4. Place cartridge into the garbage bag. *Caution: After removing the cartridge, sewer gases may escape through the opening until the new cartridge is installed. If cartridge will not be replaced immediately, place a rag or paper towels into the opening to block any sewer gases.

 

5. Scrub the housing, drain nipple, and deep inside of the tailpipe with a long 1.5-inch diameter nylon brush.

 

6. Flush the housing with 5 gallons of hot soapy water.

 

7. Wipe the inner stainless steel rim clean.

 

8. Insert the new waterfree urinal cartridge using the key. Turn key to the right (clockwise) to lock and click the new cartridge into place.

 

9. Slowly fill the new cartridge with 1 quart or more of clean water until there are no air bubbles.

 

10. Add blue sealant (allow time to drain into the cartridge).

 

11. Spray (mist) cleaner to wipe the surface of the urinal and around the cartridge. Wipe clean.

 

Common Waterfree Maintenance Mistakes

This is a must read for those who maintain Sloan waterfree urinals or plan on buying them in the future. Below are the two most common mistakes that are made, and these mistakes often result in more problems whose solutions are difficult to identify. Avoid making these mistakes by properly maintaining your waterfree urinals. If you follow these instructions, you shouldn’t have any problems.

Mistake #1: Flushing the waterfree urinal cartridge with water after the sealant has been administered.

The most common Sloan waterfree urinal maintenance mistake is flushing the cartridge with water AFTER the blue sealant has been added. Flushing the cartridge with water after the sealant has been added will flush the sealant down the drain, which in turn causes the causes the cartridge not to work properly. The smell of urine will come back through the cartridge if there is no sealant in the cartridge.

Mistake #2: Failing to clean the housing and drain nipple when changing the urinal cartridge.

The second most common mistake when performing maintenance of waterfree urinals is failing to properly clean all areas of the urinal and housing cartridge each time the cartridge is replaced. The short, horizontal drain nipple gets clogged by struvite, which is a water-soluble biosolid found in urine. Struvite that accumulates in the housing and drain nipple causes a slow flow of urine out of the urinal if the struvite is not properly removed. It can be removed with a bottle brush and some soapy water. This should be done each time a cartridge is replaced.

 

Waterfree Urinal Cartridge FAQs

How much water do waterless urinals save?

Waterless urinals can save up to 40,000 gallons of water each year. This enables buildings to gain maximum LEED credits for their urinal fixtures. They also greatly reduce water and sewage costs.

When does a waterfree urinal cartridge need to be replaced?

Cartridges need to be replaced every 3 months or every 7,000 uses.

The easiest way to schedule cartridge replacement is to simply replace it every 3 months, which works for most locations. Urinals that get more use, however, may need to be replaced sooner than every 3 months.

One way to figure out how many days your cartridge will last until it needs to be replaced is to count restroom traffic for a duration of time. For example, if you count 10 users over the period of an hour, then divide 7,000 by 10, then you would find that your cartridges need to be replaced every 700 hours which equates to approximately 29 days. (Divide 700 by 24 to convert hours to days.) If there is more than one waterfree urinal in the restroom, then divide the number of users per hour by the number of waterfree urinals. Then divide 7000 thousand by that number, and finally divide that number by 24 to get the numbers of days before you need to change the cartridge.

Other signs that your waterfree urinal cartridge needs to be replaced:

  • If your restroom starts to smell like urine even when they are clean, that is a sign that your cartridges need to be replaced.
  • The blue indicator on top of the cartridge is no longer visible
  • Fluid flows very slowly into the cartridge
  • Blue sealant appears on top of the cartridge

What urinals use waterfree urinal cartridges?

The following Sloan urinal models are waterfree urinals that utilize WES-150 waterfree urinal cartridges:

  • WES-1000
  • WES-4000
  • WES-7000

How do I clean the urinal bowl without using water?

Cleaning the urinal bowl without ruining the urinal cartridge (water removes the sealant) is simple. Use a spray cleaner and then wipe the bowl down with a rag, sponge, or mop.

 

Where to Buy Waterfree Urinal Cartridge Filters and Cartridge Removing Tools

We sell the waterfree urinal cartridge filter kits and the heavy duty cartridge removing tool at Equiparts. The waterfree urinal cartridge filter comes with everything needed to complete the repair: the cartridge, disposable gloves, a small garbage bag, a cartridge removing tool, and blue sealant. We also sell a heavy duty cartridge removing tool that is a higher quality cartridge removing tool than the tool that comes in the kit. It is a one time purchase that makes cartridge extraction easier. It features a longer handle which enables the maintenance personnel removing the cartridge to stand further away from the urinal and thus be further away from the sewage gases that may escape from the open drain during cartridge replacement.

Use the links below to view the cartridge filter kit and the cartridge removing tool on our website, or give us a call to order today.

Toll-Free: 800-442-6622

Pittsburgh: 412-781-9100
Mon-Fri 7:30am – 5pm EST

Sloan waterfree urinal cartridge kit 05317

Waterfree Urinal Cartridge Filter

Sloan Model WES150

EC Part #05317

Sale Price: $42.50 (Sale ends on December 28th, 2018)

 

Cartridge removing tool 56706

Heavy Duty Cartridge Removing Tool

Sloan Model WES7

EC Part #56706

Sale Price: $32.75 (Sale ends on December 28th, 2018)

 

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

Fat Ivan Portable Doorstops: A Useful Gizmo

Fat Ivan Commercial Portable Doorstops

When you need a door held open, you need a Fat Ivan!”

Invented by a firefighter, the Fat Ivan doorstop is an ideal tool for anyone who frequently carries things in and out of doors without a free hand to hold the door open. To use this portable doorstop, all you do is open it, slip it over a door hinge, and voila! The door will be securely held open until the Fat Ivan is removed.

Fat Ivan Doorstop Information

This doorstop is compact and can fit in your pocket. It folds up for easy storage. It’s also magnetic. This enables you to store it in a variety of ways/places for quick accessibility. The Fat Ivan door stop comes in bright colors which help the tool remain noticed so it doesn’t get left behind. It is available in black, red, and yellow. Fat Ivans are made of high-quality plastic and corrosion-resistant steel, and are manufactured in the United States.

PortableDoorStop -FatIvan

Fat Ivan Uses

This product is commonly used by emergency services to hold open doors for fire hoses, stretchers, and other emergency response equipment. A quick doorstop could actually be the difference between life and death! Along with firefighters and other first responders, other professions that commonly find this product useful are:

• Maintenance personnel
• Teachers
• Caterers
• Contractors
• Plumbers
• Cleaning crews
• Delivery drivers
• Moving companies
• Real estate professionals
• And many other service positions.

Doorstop-fativan-equiparts

Fat Ivan is a useful, professional grade, portable doorstop that comes in handy in a wide variety of situations. Teachers can use it to keep doors open without a floor stop. This is beneficial because sometimes floor stops can cause children to trip and fall. Contractors and plumbers can use the Fat Ivan when carrying in bulky equipment like ladders, drain cleaners, and other items that are hard to get through doorways. Real estate professionals can use them to keep doors open during open houses. It is useful in any industry where doors need to be kept open temporarily.

doorjam-equiparts

Another Way to Use the Fat Ivan Doorstop:

Fat Ivans are magnetic. They can be placed at the stop of the door, next to the soffit.

This feature can be used when you need to keep a door open slightly, but not necessarily wide open, so you don’t get locked out.

Note that this feature is only for use on metal frames, as the magnets on the Fat Ivan need to adhere to the metal frame.

 

 

How to Order a Fat Ivan Portable Doorstop

The Fat Ivan portable doorstop is currently on sale as part of our 6-Pack Promo. Order now to get 6 Fat Ivan doorstops for $90, at a discount of over 25% off retail price. Included in the 6 pack are two black, 2 red, and 2 yellow Fat Ivans. Sale ends May 15, 2018.

Call to order the Fat Ivan Door Stop at 800-442-6622 Monday-Friday, 7:30AM-5:00PM EST. When placing your order, be sure to mention our part number #14415 (and which color you want: black, red or yellow) or #14415CS for a quantity of 6 (2 of each color).

Megapro Screwdriver Comparison Guide

Megapro® Drivers are an innovative, high-quality line of screwdrivers that feature a clever built-in storage system. Every driver comes with a set of bits that are actually stored inside the driver’s handle so that you’ll never have to lose another bit! The variety of bits supplied allows you to save space in your toolbox by essentially combining several driver types into one. And these drivers are built to last! Equiparts carries a variety of Megapro® Drivers for both general and specialty use.

There are several features that all Megapro® Drivers have in common. The shaft of each driver can be used as a 1/4″ Hex Nut Driver. They also all have a patented Palm Saver Cap™, which does not turn as the users turns the driver. Another feature these drivers (except the Ratcheting Driver) share is the patented EZ Guide Collar™, which provides the user with better control and maintains consistent contact between the driver bit and the screw. This allows the screw to be driven with much more ease. The drivers each have a retractable bit cartridge located at the top of the driver. This allows for easy storage and organization of bits, making any job that much easier.

What makes each driver different?

The Original

Equiparts Part #37696 

This is the most popular of the Megapro drivers. It features fourteen of the most common bits for driving screws. The shaft can be used as a 1/4″ Hex Nut Driver, making it 15-in-1. Each of the seven bits included are double-ended professional quality bits. The bits included with The Original are: Phillips Bits 0, 1, 2, and 3, Square Bits 0, 1, 2, and 3, Slotted (Flat) Bit 4 and 6, and Torx Bits 10, 15, 20, and 25. Megapro model number 151NAS.


The Tamperproof

Equiparts Part #37697
This driver is a must have for tradesmen in commercial and industrial fields. It is ideal for locksmiths, electricians, and any maintenance personnel. The driver comes with fourteen double-ended security bits, including Spanners 6, 8, 10, and 12, Hex Pins 1/8, 9/64, 5/32, and 3/16,  Torx Pin Bits 10, 15, 20, 25, 27 and 30. The Megapro model number is 151TP.


The ShaftLOK

Equiparts Part #37698
The ShaftLOK driver features an innovative grooved bit design which prevents the bits from falling out of the driver. No more lost bits when they get stuck in the fastener. The driver includes fourteen double-ended bits. The bits included with the ShaftLOK are: Phillips Bits 0, 1, 2, and 3,  Square Bits 0, 1, 2, and 3, Slotted (Flat) Bits 4 and 6, and Torx Bits 10, 15, 20, and 25. Megapro model number 151SL44.


Ratcheting

Equiparts Part #37702
The Ratcheting screwdriver features patent pending ZAD 8 Zinc Alloy SOLID-CORE ratchet which delivers over 225 inch pounds of torque strength. Driving fasteners is easier and faster with the Precision 28 tooth ratchet design and rubberized cushion grip handle. The driver comes with six double-ended professional quality bits. The bits included are: Phillips Bits 0, 1, 2, and 3, Square Bits 1 and 2, Slotted (Flat) Bits 4 and 6, and Torx Bits 10, 15, 20, and 25. Megapro model number 211R2C36RD.

The HVAC

Equiparts Part #37710
This screwdriver is a must-have for any HVAC technician. It is a high quality tool that also saves space. This driver features 6 double-ended bits which include:Phillips Bits 0, 1, 2, and 3, Phillips DoubleLok Bit 2, Slotted (Flat) Bits 3, 4, 5, and 6, as well as 5.5 and valve stem bits. The driver also comes with a Square Awl Reamer bit which is great for piercing through sheet metal. Megapro model number 141HVAC-U.

38187_screwdriver-2
The Outdoor

Equiparts Part #38187
This driver is specifically for rugged outdoor use. It can be used on ATVs, snowmobiles, and more! The handle is made with a multi-resin molding process which makes it nearly indestructible and great for outdoor use. The driver is great for in the field situations like emergency repairs or maintenance. Included with the driver are six double ended bits plus a round awl to undo soaked or over tightened rope knots. Just like the drivers listed above, the shaft of this driver can be used as a 1/4″ Hex Driver. The bits included with this rugged driver are: Phillips Bits 0, 1, 2, and 3, Square Bits 1 and 2, Torx Bits 10, 15, 20, and 25, and Flat Bits 4 and 6. Megapro model 151OUTDOOR.

Add Ons that help make your job easier

High Intensity Work Light

Equiparts Part #37680
This compact, high-intensity LED work light produces a powerful floodlight to make your everything in your work space easier to see. The housing of the work light is rugged and water resistant, which makes it last longer. It has a quality on and off push button, and a molded clip allows the work light to be secured in your pocket. This work light also has a magnetic swivel base, allowing it to cling to metal surfaces, and turn in any direction. It uses three AAA batteries to power the six super-bright light emitting diodes. Megapro model #6WORKLIGHT.


Locking Extensions

Equiparts Part #37700 (6″ Extension Pictured) | Equiparts Part #37699 (10″ Extension)
These locking extensions are great for getting into those hard to reach places. The 6 inch and 10 inch extensions both lock into the ShaftLOK screwdriver shaft with a 0.375 inch minimum clearance. For getting into those extremely hard to reach places, you can link multiple extensions together for a longer reach. Megapro model 6EXT-SL6-C for the 6 inch Extension and 6EXT-SL10-C for the 10 inch extension.

 

Other Specialized Drivers

Listed below are a collection of unique drivers that are specialized for different situations or professions. If you would like to order any of these drivers or any other that Megapro carries, please give us a call at 800-442-6622 M-F 730AM-5PM.

Automotive Ratcheting

Equiparts Part #37721 
This 13-in-1 ratcheting screwdriver is a must-have for professional auto mechanics, or anyone who regularly works on cars. The magnetic shaft is constructed from 303 stainless steel. The 28-tooth ratchet design allows you to drive with speed and ease. The handle has a rubberized cushion grip for comfort.  Like the drivers above, the shaft can be used as a 1/4″ Hex Driver. The driver includes 12 one-inch bits made of S2 industrial grade steel which are ideal for use on automotive screws.The bits included with this driver are: Phillips Bits 1, 2, and 3, Square Bit 2, Slotted (Flat) Bits 4 and 6, and Torx Bits 10, 15, 20, 25, 27, and 30. Megapro model 211R1C36RD.

Electronic

Equiparts Part #37727
This unique screwdriver is built specifically for service technicians in the electronics field. It comes with seven double ended professional bits, making it fourteen bits in total! The shaft of the driver can be used as a 1/4″ Hex Driver. The bits included with this driver are: Square Bits 1 and 2, Torx Pin Bits 10 and 15, Spanner Bits 6, 8, 10, and 12, Phillips Bits 0, 1, 2, and 3, and Slotted (Flat) Bits 4 and 6. Megapro model 151ELEC.

 

The Elevator

This screwdriver is designed exclusively for elevator service technicians. The bit cartridge contains a mix of tamperproof and standard bits. The handle is specially made to be durable and drop resistant. The seven double-ended professional bits included with this driver are: Torx Pin Bits 10, 15, 20, and 25, Spanner Bits 6, 8, 10, 12, Phillips Bits 0, 1, 2, and 3, and Flat Bits 4 and 6. The shaft of this driver, like the others listed above, can also be used as a 1/4″ Hex Driver. Megapro model 151ELEV.


The Jobsite

Equiparts Part #38189
This driver is designed for use while on the job. It has a yellow handle which helps it to stick out in a toolbox or on a tool belt. This 15 in 1 driver includes the following bits: Phillips Bits 0, 1, 2, and 3, Hex Bits 1/8, 9/64, 5/32, and 3/16, Torx Bits 10, 15, 20, and 25, and Flat Bits 4 and 6. When there is no bit in the shaft, the shaft itself can be used as a 1/4″ Hex Driver. The combination of different bits included with this driver gives it the ability to fix pneumatic power tools while on the job. Megapro model 151JOBSITE.

MegaproDisplay1Megapro Information

Megapro officially started in 1994, driven by inventor Hermann Fruhm’s concept of creating a better storage solution for screwdriver bits by placing them inside the driver handle. This was an innovative idea, and would help solve the problem of missing bits while on the job. After numerous prototypes and sketches, the first Megapro screwdriver was created in the early 1990s. Its patented features quickly gained market success, and many users saw and appreciated the quality of the screwdriver as well as how easy it was to use. There are over twenty different variations of the screwdriver, each one designed specifically for a different type of job. Today, Megapro continues to grow domestically, and their international reach is also expanding.

Print, Save or Share the Megapro Drivers PDF

Rothenberger Emergency Pipe Repair Clamp

 

EmergencyPipeRepairClamp-Equiparts

Save the Day

Be prepared to repair pipes with the Emergency Pipe Repair Clamp – The quick, easy, and professional way to temporarily repair a burst, perforated, or leaky pipe. This Emergency Pipe Repair Clamp is a great item to have in virtually any building. In cases of emergency, such as when a pipe has burst in an area where the water supply cannot be shut off, this clamp can reduce water damage and save a lot of time, energy, and money, not to mention water!

Rothenberger-RepairClamp-EquipartsNo tools required!

Simply open the device, center it around the problem area, firmly close both housing members, engage the latch mechanism and close the device around the problem area with a squeeze of your hand.

Use On:

• Use on Copper, CPVC or PEX piping
• Both domestic and commercial heating & water pipes
• Frost damaged or perforated water pipes

The Emergency Pipe Repair Clamp is now on sale at Equiparts! To place your order, give us a call on our toll-free number: 800-442-6622 Monday through Friday, 8AM-5PM EST. Or add the products to your quote request on our website! Available in two sizes:

RepairClamp-RothenbergerKibosh-Equiparts
Emergency Pipe Repair Clamp for ½” Pipe
 (EC Part #38012)

Emergency Pipe Repair Clamp for ¾” Pipe (EC Part #38013)

Know someone who needs the Rothenberger Repair Clamp in their toolbox? Share the Pipe Repair Clamp PDF with them!

Inexpensive Flexible Drain Cleaning Tool for Every Plumber’s Toolbox

This new Drain Cleaning Tool by Tornado unclogs drains quickly and easily with a new patent pending design that is more efficient than other drain cleaning tools. It’s length makes it reach further into the pipe – through S and P traps to the problem area. Its single side barb and spearhead design helps it move through the pipe smoothly, and rotate through any resistance while simultaneously grabbing onto any hair or debris stuck in the drain.

Features:

  • Unclogs sink, tub, and shower drains easy and fast
  • 26” length reaches further into pipe than other drain cleaning tools
  • Durable, flexible and lightweight Poly construction
  • Patented single-sided barb and spear head design for more effective reach and grab
  • Reaches through the P or S trap to grab clogs
  • Environmentally safe with no chemicals required.
  • No disassembly required for most drains
  • Rinse and reuse

To order, call us toll-free at 800-442-6622 Monday-Friday, 7:30AM-5:00PM or submit a quote through the 26″ Flexible Hand Held Drain Cleaning Tool on our website. You can also share or download our 38010 Flexible Drain Cleaning Tool PDF.

Blue Monster Compression Seal Tape

Attention Plumbers and Facility Maintenance Personnel: What do you do when you have to fix a leaky pipe and you can’t shut off the water? Or maybe you don’t have the parts to fix it? Look no further than Blue Monster Compression Tape, the repair solution that doesn’t require you to shut off the main water source. Blue Monster Compression Tape is a self-fusing silicone tape that seals through compression.

Blue Monster® Compression Seal Tape

  • MillRoseTools-Sale-Equiparts• Seals leaks up to 150 PSI (water, air, steam)
  • • Self-fusing layers for a waterproof, long-term compression seal
  • • Effective to 500°F / 260°C
  • • Suitable for burial without jacketing
  • • Environmentally safe and non-toxic
  • • Stops and prevents corrosion
  • • Safe for drinking water
  • • All purpose – use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, and more
  • • Ideal for irrigation pipe repair
  • • Easy to use – no waste

 

Blue Monster Compression Seal Tape is a must-have product for plumbers and maintenance managers everywhere – and it’s ON SALE NOW at Equiparts! There’s no better time to prep for an emergency than now! Add this tape to your toolbox, and win the battle against leaks every time!

Blue Monster Compression Seal Tape

Blue Monster Compression Seal Tape

 

Check out all of the Blue Monster products we carry, including the 1”x12 ft Compression Tape (EC Part #36887), the 2”x12 ft Compression Tape (EC Part #36888), plus Anti-Seize Lubricant, Quick-Release Pliers, Fitting Brushes, and more on our website, or give us a call to place an order: 800-442-6622 (M-F, 7:30AM-5:00PM EST).

4 Tools All Maintenance Personnel Need

Whether you maintain a few apartment buildings, a hospital, or a school, there are some tools that should be stocked in all maintenance departments! This list will help you keep your facilities in perfect working order, safeguard against emergency situations, and more! Find out what makes these tools great to have on hand at any facility by learning about their ability and features below!

Hinge Doctor Toolkit

1. Hinge Doctor Complete Tool Kit

Does the building you manage have doors? We thought so. Chances are, some of those doors have hinges that can benefit from being realigned. The Hinge Doctor is a hinge restoration tool, designed to adjust new, worn, and improperly adjusted hinges. If a door in your building is sagging or dragging, it’s due to an issue with the hinge. Left flawed, the hinge will wear faster, and cause damage to the door and the floor underneath the door, while also making the door difficult to open and close. This Hinge Doctor kit includes sizes for both residential and commercial doors, so you’ll be ready to tackle almost any door. Repairs with the Hinge Doctor are quick and easy, allowing you to fix sagging doors in just fifteen seconds! Get the Hinge Doctor Complete Tool Kit and never have hinge issues at the buildings you manage again!
See the Hinge Doctor in action in our ‘Hinge Doctor Review and How-to’ video:

Angle Stop Combo Wrench

2. Angle Stop Combo Wrench

The Angle Stop Combo Wrench is a new product at Equiparts that we are very excited to have in stock! This multi-purpose tool is perfect for use on angle AND straight stops! The grip is cushioned, and the wrench is adjustable up to ½”. It has a reversible jaw for an extra wide grip and comes with removable caps to protect surfaces and prevent marring on objects with plated finishes. This wrench makes installing angle and straight stops a snap! It’s a must have tool for any plumbing maintenance personnel. Get the Angle Stop Combo Wrench and make all of your angle and straight stop repairs with one great tool!

Insta-Clamp Emergency Kit

3. Insta-Clamp Emergency Kit

Insta-Clamps enable facility managers and maintenance personnel to stop leaks at the solder joints on pipes quickly and easily. With the Insta-Clamp Emergency Kit, the building you manage will never need to have an emergency shut down due to a burst pipe. You can take control of the situation by providing a fast, temporary fix, and scheduling a permanent repair at the most convenient time for you and/or the facility. Having an Insta-Clamp kit on hand is a no-brainer for maintenance professionals. There is no single clamp that is versatile enough to fit all settings, which is why having the complete kit is ideal. This kit includes one size of each Insta-Clamp™ from 1/2″ to 2″. The Insta-Clamps can repair couplings, 45s, 90s, tees, and joints. Pick up the Insta-Clamp Emergency Kit today! 

Offset Non-Marking Pipe Wrench

4. Offset Non-Marking Pipe Wrench

The Offset Non-Marking Pipe Wrench is another must have tool that we carry at Equiparts. It enables you to get to those hard-to-reach places where nuts tend to reside. This tool has a hex jaw design, which gives you a multi-sided, secure grip on all hex nuts, square nuts, unions and valve packing nuts. This Offset Pipe Wrench is non-marking, so you don’t have to worry about damaging or marking the object you are gripping, unlike wrenches with teeth that mark-up brass and remove chrome finish. The jaw is thin and smooth, so it is able to fit into the tightest of places. The wrench jaw opens to a max width of 2-⅝”, and can hold nuts up to 1½”. Get the Offset Non-Marking Pipe Wrench today, and have the tool you need for tough to reach repairs.

We stock tons of unique and specific tools for almost every application at Equiparts, and we are even better known for our wide selection of repair parts. Browse through our product categories, or give one of our parts specialists a call. Order one or all of our tools listed above, or inquire about a tool or part you’ve been looking for by calling us at 800-442-6622 Monday-Friday, 7:30 AM-5:00 PM.